How to Waterproof Your Boots ( 5 Best Waterproofing Ways )

If you intend to spend any time outside this winter, you must take precautions to protect yourself from the chilly weather and the possibility of precipitation. Your plans ought to include some time spent in the fresh air. Waterproof boots are a necessity for anyone who spends a significant amount of time outside in the snow and rain. 

Therefore, if you wear appropriately waterproofed boots, your feet will stay warm and dry even in the worst weather, even if you are outside for an extended period. However, there are a few different approaches to waterproofing your boots. We will discuss all in below:

Steps to Waterproofing Your Boots

You can do a few things to waterproof your boots if you find them getting wet regularly.

  • Wrap the boots in a towel or cloth and place them in a plastic bag. 
  • Put the boots in a warm, dry location for several days. 
  • Remove the boots from the pack and turn them inside out. Apply a coat of waterproofing spray to the inside of each boot. 
  • Let the spray dry for several minutes, then put the boots back on.
Steps to Waterproofing Your Boots

1. Waterproofing Process

You should know that there are a few things you need to do to make your boots waterproof. Making sure the boots are completely sealed is one of the most important things.

You can use a sealant, a spray, or a boot dryer. If using glue, make sure to apply it to the inside and the outside of the boot. A spray will work fine if you need to waterproof one or two areas. 

If you’re using a boot dryer, ensure it’s on low heat and let the boots sit for about 20 minutes.

You can take a few steps to learn how to waterproof your boots. Too waterproof your boots, depending on what type of boot you have. You will need to seal the seams with a waterproofing agent for leather boots. For rubber boots, you will need to coat the inside of the boot with a waterproofing agent and then put a layer of heat-resistant insulation over the top. 

2. Apply Beeswax to Boots

Apply Beeswax to Boots

Waterproofing your boots is a great way to keep them from getting ruined by the weather. Just apply beeswax to the shoes and let them dry.

  • 1. Start by applying a layer of beeswax to the exterior of your boots. This will help seal the moisture inside and prevent it from penetrating the boot.
  • 2. Next, apply a layer of wax to the interior of your boots. This will help to keep your feet warm and dry.
  • 3. Finally, put on your waterproofing agent and wait for it to dry. Once it’s finished, your boots will be ready to go outside.

3. Use a Heat Gun to Melt And Apply Wax to the Boot

If you get caught in the rain or snow, your boots could become soggy and uncomfortable. And if you must spend a night in the woods: wet boots can lead to cold feet and an unpleasant camping experience.

Use a Heat Gun to Melt And Apply Wax to the Boot

So how do you waterproof your boots? The most common way is to use a heat gun. Place the heat gun on low or medium heat, and apply the heat to the boot’s surface until the wax melts. Be careful not to scorch or burn yourself! Once the wax has melted, use a damp cloth to wipe off any excess wax. 

4. Put Freshly Waterproofed Boots

To waterproof your boots, you only need a little water-repellent spray and some cotton balls. First, apply the spray to both sides of the boot’s leather or fabric lining.

Then, soak a few cotton balls in water and insert them into the spray-soaked area. Leave the cotton balls in place for at least 30 minutes, or until the boot feels dry to the touch.

Put Freshly Waterproofed Boots

This simple trick will keep your boots completely dry in any weather condition—whether it’s a light rain or a full-blown monsoon!

So go ahead and confidently put on your waterproof boots – you won’t regret it!

5. Drying

The most important thing is to ensure that your boot is dried correctly every time you use it. Wipe down any wet areas with a cloth or paper towel, and allow them to dry completely before storing them away.

If you’re in a hurry, you can also place your boots in a warm oven on low heat for 15-20 minutes, but make sure they are completely dehydrated before leaving them there for too long.

Drying Time

If it starts to rain while you’re outside, be ready with a sturdy pair of rain pants or an overcoat. A good rule of thumb is to bring enough clothing to last for three days – even if you don’t need it that long!

And finally, if your boots still leak after all these precautions have been taken, consider investing in waterproof boot liners. They’ll help keep your feet dry.

When Should You Waterproof Work Boots?

Wet conditions can cause work boots to become heavy, leading to fatigue and a decreased ability to perform tasks.

There is also a risk of slipping and falling when wearing heavy boots. Because of these factors, it is crucial to ensure your boots are waterproof when working in wet conditions.

How do You Fully Waterproof Boots?

Waterproofing boots is important to keep them dry and comfortable in the rain or snow. There are a few different ways how to waterproof your boots, each with its pros and cons. Here are three methods.

  • 1. Hydrophobic Down Boot Covers: These covers are made from a synthetic fabric with a high water repellency rating. They’re fitted over the boots like a sock and zip up the front. The downside is that they can be pretty bulky and take up a lot of room in your pack, and they may not be effective in extremely wet conditions.
  • 2. Spray-On Waterproofing: This is probably the most common type of waterproofing for boots. You apply a coat of waterproofing spray to the shoes’ exterior, then wait 10-15 minutes for it to dry. This method is easy and quick, but it doesn’t always work well in very wet or heavy conditions.
  • 3. GORE-TEX Booties: These are special booties made from a particular fabric type with excellent water repellency properties. They fit over the top of your boots like a regular Shoe but have an extra layer of protection inside.

How do You Make Leather Waterproof?

Using a spray protectant as a commercial leather waterproofing treatment is possible, which is an option if you are seeking one.

There is also an option available that is beeswax-based, which I like. Beeswax, a naturally occurring substance, is an efficient natural waterproofing solution appropriate for leather use.

What home remedy can I use to waterproof leather boots?

If you are looking for an inexpensive, natural way to waterproof leather boots, there are several home remedies you can use. One trick is to use a hair dryer on low heat to warm the bootup and then apply a coat of wax or polish.

Pour boiling water over the boots by sealing them in a plastic bag and tossing them in the water. Once the water has cooled, pour the water out of the bag and let the boots dry.


When it comes to staying warm, dry, and comfortable in cold weather, waterproof boots are a must. But how to waterproof boots and why? 

There are many reasons why waterproof boots are so important. It can be frustrating when your boots get wet, and it is required of you. To take them off and hang them up to dry. You can take a few simple steps on how to waterproof your boots, so they stay on all day long.

Leave a Comment