6 Best Ways to Waterproofing Your Boots Naturally

Are you looking for a proper way that can make your shoes waterproof? This blog is about the best ways of waterproofing boots. So, be with us till the end. We’ll properly guide you about amazingly working techniques of boots waterproofing.

The waterproofing process is already applied to several leather shoes. To maintain them impermeable and your toes clean, you’ll need to treat them frequently throughout time because nothing will last indefinitely. Depending on how frequently you use your footwear, you may need to prevent water from entering them. 

The best situation to cure them is when moisture condenses, dripping on them, or if they become particularly unclean. It can be interpreted as every few days or weeks.

To care for your shoes correctly, you must be aware of the components they are constructed of. Each fabric is unique and necessitates a specific substance for waterproofing. Let’s commence enhancing your shoes by locating the best water resistance.

The Right Time to Waterproof Work Boots

September or October are ideal times to water-resistant your boots because they are warm and dry. In this manner, they will be closed off before being exposed to more hot weather. Drying them throughout the monsoons is usually preferable to letting them wet while your toes become damp.

How Are Boots Waterproofed?

Shoes made from genuine leather or composite fiber can be waterproofed in several different methods.

It all depends on the waterproofing solution you use. The most effective and widely used methods for waterproofing shoes are listed here.

How Are Boots Waterproofed

1. Get Your Boots Waterproof and Ready

On fresh, moist shoes, water-resistant solutions are the most effective. You require moisture inside that outermost surface of the shoes to pull the water-resistant solution entirely in. You don’t want dust or sand to hinder absorption and infiltration.

Cleaning your booties Entails:

  1. Before washing, undo the straps.
  2. Dirt and debris can be contributed to lower by using a soft bristle brush.
  3. Add potable water and the shoe washer of your choice for a deeper rinse.

2. Waterproofing Solution Formulation

Start by checking that water has completely penetrated the shoe leather’s stiffness. The moment is great if you have just finished cleaning. Cleaning water over your shoes won’t do the trick because the leather needs time to absorb the moisture.

After washing, if your shoes are dry or not moist sufficient, cover them in a very wet cloth and place them in a drain basin for a few hours. Use the waterproofing solution once the moisture has completely seeped into your shoes.

The specific steps will differ, so review and carefully adhere to the item’s usage directions.

3. Drying

Your shoes will require some time to cure sufficiently after the process. A location with average temps, dry weather, and excellent airflow should be chosen for them.

Never hurry up the drying stage with high heat, such as a blow dryer, since this could remove the bond on your shoes or lead the suede to break. Additionally, stay away from cleaning your shoes in the light.

But you can employ a fan to hasten the evaporation. It works well to cure the footbed and it is the best way to soak up the wetness by placing the curled-up paper in the shoes. Your shoes will be prepared for you to put on and create an impact once you’ve cleaned, treated, and dried them.

Put them on now, and get prepared to embark on all the twisting routes, cliffs, and raging waterways you come across on your upcoming adventure trip.

6 Best Ways to Waterproof Boots

For suede, waterproofing solutions are typically created. To confirm you receive all you require for your leather shoes, review the product information and application pedagogy before purchasing and wearing them.

You don’t need to clean your shoes in certain places if they have a moisture barrier. Always try a solution on a narrow corner to see how you want it before using it on a larger area because some solutions can make your shoes look dimmer.

So, here is a quick way to waterproof your boots.

  1. Waterproofing with Oils
  2. Waterproofing with Spray
  3. Boots Waterproofing Creams
  4. Waterproofing Pastes
  5. Water-Repellent Wax to Waterproofing
  6. Waterproofing with Water-Resistant Seam Sealant

1. Waterproofing with Oils

Leather boots are often waterproofed with oils. They can extend the useful life of the shoes while keeping water out. It’s important not to use the grease too generously when cleaning the suede with oil because covering can lead fibers to break and discolor.

Apply a microfibre cloth and a moderate amount of protection oil to properly coat the shoe when applying the oil to your booties. Wipe an oil brick, which has been solidified into a square, across your footwear from lid to base and both sides.

2. Waterproofing with Spray

Sprays that are impermeable work quickly and easily. Because of this, individuals frequently select them above other hydrological and ecological. Additionally, you can apply them to fabrics. Like with other procedures, you must wash your shoes. 

After cleaning them, spread out paper to shield the surface from the spraying. After reading the directions completely, keep blasting your shoes. The spray tip should be directed toward the shoes while you keep the bucket 8 to 12 inches away from them. 

Then, push the spraying lever to give the shoes a constant, even mist. Overcoat the whole shoe lightly, then let it cure. If required, use a double skin. You will need to repeat the spritz every month or if your shoes become damp, just like you would end with lube.

3. Boots Waterproofing Creams

Boots can be waterproofed naturally and traditionally using lanolin, a lotion made from wool fibers and grease. This material has been applied to dry booties and other suede accessories for generations.

When chilly, wool solidifies. To keep the suede supple and resistant, put it on the shoes and rub it gently with your fingertips or a clean microfiber. As an organic cream containing oil, it won’t happen on synthetic fibers.

4. Waterproofing Pastes

Paste-based water-resistant products also exist. For materials, a large variety of companies are available to you. After that, wash the boots and allow them to dry naturally. Then, put a paste on your shoes using a wash towel and pressing movements. Wrap all outermost layers completely.

5. Water-Repellent Wax to Waterproofing

Another widely used substance for preserving leather shoes is shoe beeswax. Wax is the well-known one. You must slightly warm the wax and the shoes before applying the wax to get them more malleable.

Afterwards, use your hands to massage the beeswax on both sides throughout the shoe. Keep an eye out for gaps and fractures. After that, gently reheat the shoes to soften out any rough edges.

6. Waterproofing with Water-Resistant Seam Sealant

Although not required, a seam sealer is suggested. Putting a seam sealant with a polyurethane core on the joints of your shoes can prevent dampness from seeping in.

If you skip this procedure, dampness will build up over time and eventually rip the shoe away, separating the joints from the bottom.


Is waterproofing required for leather boots?

Although you don’t need to prevent water from entering every set of boots you possess, you must think about doing so for leather or trekking shoes because these are the styles of footwear that are least likely to be exposed to moisture. Who likes watery claws, right?

Can I water-resistant my boots using Vaseline?

You can protect your shoes with Vaseline. It can polish, sanitize, and smooth the suede in conjunction with waterproofing. Vaseline’s wax can cure suede breaks and improve the color of your suede.

Does spraying leather boots make sense?

Spray the protection on your shoes at least once a week, using the same technique. To hydrate the suede, you must frequently moisturize booties to maintain gloss and extend the life of the suede, just as you must moisturize your body to counteract the winter temperatures.

Final Thoughts

Boot waterproofing is smart if you want to keep your feet clean and comfortable all day. You may rely on your leather boots for many years if you invest the effort to preserve them from dampness.

You can use excellent work shoes for a long time by selecting them. Only then can you consider using water-resistant treatments to maintain them clean and your toes safe from wetness.

If you are still confused about the best way to waterproof your boots, leave a comment in below. We will try to give a detailed answer on your question!

Leave a Comment